Modern Blowroom

In processing the material, different types of machines are necessary, namely those suitable for  opening, those for  cleaning and those for  blending. Different intensities of processing are also required, because the tufts continually become smaller as they pass from stage to stage. Accordingly, while a coarsely clothed cleaning assembly is ideal after the bale opener, for example, it is inappropriate at the end of the line. Therefore, there are no universal machines, and a blowroom line is a sequence of different machines arranged in series and connected by transport ducts. In its own position in the line, each machine gives optimum performance at any other position it gives less than its optimum. Also there may be advantages in different modes of transport, feeding, processing, cleaning and so on from one machine to another along the line. Finally, the assembly of a blowroom line depends among other things on:

1.The type of raw material;

2.The characteristics of the raw material;

3.Waste content;

4.Dirt content;

5.Material throughput;

the number of different origins of the material in a given blend.

In most cases a modern blowroom line consists of the following machines, as shown in (Rieter) and (Trützschler), illustrating two typical blowroom lines.

 8. Rieter blowroom line; 1. Bale opener UNIfloc A 11; 2. Pre-cleaner UNIclean B 12; 3. Homogenous mixer UNImix B 75; 4. Storage and feeding machine UNIstore A 78; 5. Condenser A 21; 6. Card C 60; 7. Sliver Coiler CBA 4

9. Trützschler blowroom line; (conventional, for combed cotton. One line with a number of variations.)

Advantages of modern Blow room line

Modern Blow Room line or latest developments in the B/R machinery consists

1.Modern mixing machine (Automixer, Multimixer, Aeromixer, Latest mixing bale opener etc.,)

2.Improved opener & Beater (ERM cleaner, mono cylinder, axiflo cleaner, Airjet cleaner, etc.)

3.Automatic scutcher.

4.Automatic lap doffing device.